Tempered glass is strong

What is tempered glass? Find out from a glass professional!

Tempered glass is used for shower and patio doors, tabletops, and windows throughout our homes & businesses. But what is tempered glass and how is it made? Tempered glass is a type of safety glass that is stronger than annealed glass and also safer – because when broken it forms harmless popcorn fragments. Tempered glass, ... Read more

By John

Tempered glass is used for shower and patio doors, tabletops, and windows throughout our homes & businesses. But what is tempered glass and how is it made?

Tempered glass is a type of safety glass that is stronger than annealed glass and also safer – because when broken it forms harmless popcorn fragments.

Tempered glass, sometimes called “toughened” glass is made by heating annealed glass to about 1200 °F (650 °C) – a temperature at which it begins to soften. The outer surfaces are then cooled rapidly creating a solid skin of glass surrounding the still hot center. This procedure, called quenching, is done in a few seconds by high-pressure air blasting the surface of the glass from an array of nozzles in varying positions.

Method of making Tempered Glass
The slowly cooling center of tempered glass contracts and puts the rigid skin into compression.

The glass is then cooled slowly so that the center of the glass contracts – pulling in on the solid surface skin. As a result, the outer surface comes under compression with an impact strength of 4 or 5 times that of annealed glass.

Stresses inside a pane of tempered glass
In tempered glass the surface is under compression

Tempered glass cannot be cut

It is vital to understand that glass, once tempered, cannot be cut, drilled or notched. Breaking the surface layer will result in explosive failure.

This means that all machining processes, cutting, edge-polishing, beveling, drilling, and grinding must be done before the glass is tempered. It also places a high premium on accurate measurements because the sizes cannot be changed.

Very minor modifications – polishing off 1/16″ from a side, or rounding the corners slightly can be made without the glass breaking but should only be done with care and by experts.

Read this post to investigate why it is not possible to cut tempered glass.


Production methods for tempering glass

There are two basic methods for manufacturing tempered glass:

  1. Glass is suspended vertically with tongs
  2. Glass is supported horizontally on rollers
tempering plant
Horizontal tempering oven (note: this is a repeating gif – the glass only goes through the oven once!)

Both methods have pros and cons. In vertical tempering ovens, the tongs inevitably leave small impressions on the glass, whereas the rollers in a horizontal oven can produce characteristic waves or corrugations.

Tempered glass with undulations
Surface corrugations in tempered glass are caused by rollers in the tempering oven.

Tempered glass is identical in appearance (color, reflectance, translucency) to annealed glass but both tempering methods produce some degree of bow and warp. (This is most noticeable in long narrow panes where the edge effect can create warping sometimes referred to as “pretzelling”.)

Horizontal plants are the more modern type having the advantage of shorter processing time – giving greater output and avoiding tong marks.


Heat-strengthened (heat-treated) glass

An intermediate type of glass between annealed and fully tempered is called heat-strengthened glass and is produced by heating and cooling annealed glass in a process similar to that used in tempering.

The difference is that the glass is heated to 1150 °F (621 °C) – a temperature lower than that used for tempered glass – and the cooling process is slower.

Heat-strengthened glass is about twice as strong as annealed glass of the same thickness but not as strong as fully tempered glass.

Heat-strengthened glass is not a safety glass product as defined by the various code organizations but it does have greater resistance to thermal loads than annealed glass and, when broken, the fragments are typically larger than those of fully tempered glass.

Heat-strengthened glass is intended for windows in skyscrapers (curtain walls), where additional strength is desired to withstand wind load and thermal stress but where fully tempered glass is not necessary.

Curtainwall glass
Curtainwall glass on modern buildings is often heat-strengthened to resist thermal and wind loads

Heat-strengthened glass cannot be cut or drilled after heat-strengthening and any alterations, such as edge grinding, sandblasting or acid etching can cause premature failure.


Chemically tempered glass

Chemically tempered, also known as chemically strengthened, glass is made by the ion exchange process.

Glass is submerged in a bath containing potassium nitrate heated to about 570 °F (300 °C ) causing the sodium (Na+) ions on the surface of the glass to be replaced by larger potassium (K+) ions. It is the extra volume of the K+ ions, packed into the space vacated by Na+ ions that creates the state of compression and hence the strength of the surface.

Ion exchange process strengthens glass
The ion-exchange process strengthens the surface of glass for smartphones

The most famous brand of chemically strengthened glass is Gorilla® glass made by the Corning® Glass company.  Read this informative post for more about chemically strengthened glass.


Benefits of tempered glass

Tempered glass has numerous benefits compared with annealed (non-tempered) glass. In summary, tempered glass is:

Tempered glass is tougher

A vital quality of tempered glass is that it is 4-5 times more impact-resistant than annealed glass:;

Tempered glass is impact-resistant
Tempered glass is 4 times more impact-resistant

Do not try this at home – but tempered glass is very hard to break – even when hit with a hammer.

In contrast, annealed glass breaks easily and forms dangerous shards:

Annealed glass breaks into dangerous shards
Annealed glass breaks into dangerous shards


Safer – breaks into harmless fragments

Even though tempered glass is hard to break it will explode into a thousand pieces if you strike a vulnerable corner:

Tempered glass is categorized as a type of “safety” glass because the broken pieces are relatively harmless

This breaking characteristic makes tempered glass relatively safe but it is important to note that it does not make your building secure. Broken tempered glass falls out of the window frame allowing bad guys to enter.

Tempered glass is strong
Tempered glass disintegrates when broken – leaving your valuables vulnerable

For building security, a different type of safety glass – laminated glass – is required.

Laminated glass prevents entry
The vinyl interlayer holds broken laminated glass together – helping to prevent burglars from breaking in.

Read this post to learn all about safety glass and the relative benefits of tempered and laminated glass.


Tempered glass is heat resistant

Tempered glass resists thermal stress (uneven heating) – that’s why it is used for stovetop backsplashes and for the windows in ovens. Unlike tempered glass, annealed glass forms distinctive curvilinear stress cracks if it is heated unevenly.

Thermal crack in glass is curvilinear
Distinctive curvilinear crack is the result of thermally generated stresses

Placing a very hot saucepan directly on your annealed glass top will create a temperature gradient between hot and room-temperature glass. The internal structure of the glass becomes stressed as molecules attempt to accelerate in response to the asymmetrical heating. The result is very interesting, but unrepairable, curvilinear cracks in the glass.


As an Amazon Associate, I earn from qualifying purchases


Tempered glass is scratch-resistant

Tempered glass is much more scratch-resistant than plexiglass or polycarbonate:

Glass is scratch-resistant
Glass is more scratch-resistant than plexiglass

However, the surface of tempered glass is more brittle than that of annealed glass and therefore scratches slightly easier as the image below shows.

scored lines on glass
Tempered glass fractures and forms chips when scratched.

To learn all about scratches in glass tabletops – read this post. Always use placemats or trivets when using ceramic dishes on your glass tabletops.

Scratches in tabletop caused by mug
A rough ceramic mug can scratch glass, smooth china glides over the surface.

Tempered glass is affordable

The improvements in the manufacturing process mean that tempered glass is only slightly more expensive (10% – 15% more) than annealed glass. This means that, for many projects, it is prudent to play it safe and choose safety glass to protect your family against the unlikely event of glass breakage.

Price comparison for 1/4″ clear glass

[CP_CALCULATED_FIELDS id=”39″ ]

Note that the figures above are approximate retail prices for Tucson customers in 2022. Your cost will vary and probably be higher in larger metropolitan areas.

Safety warning glass is dangerous!

Always consult a professional if in doubt about glass safety. Read this post to find out if your glass tabletop should be tempered.

Tempered glass is identical in appearance

It is important to stress that, apart from the increase in hardness and the breaking characteristics, tempered glass is identical to annealed glass.

Tempered glass has the same color, clarity, chemical composition, light transmission, compressive strength, hardness, specific gravity, coefficient of expansion, thermal conductivity, and stiffness as annealed glass.


Uses of tempered glass

Tempered glass was developed as a way to minimize the risk of horrific injuries caused by razor-sharp shards of broken annealed glass. Read this post to learn all about injuries from broken glass and how to avoid them.

Safety codes mandate the situations where tempered glass should be used in residential and commercial buildings. Essentially, safety glass is compulsory anywhere there is a danger that people could walk into or fall through a glass window, door, screen, or tabletop.

The details of the building codes are complex but the drawing below summaries the most important locations for safety glass:

Where tempered glass is mandated by building codes
Main locations where tempered glass is mandated by building safety codes

Don’t take chances with the safety of your family. Order a tempered glass tabletop with free shipping and great pricing from Amazon


Table comparing the uses of tempered & laminated glass


ApplicationTemperedLaminated
Shower EnclosuresX
TabletopsX
Patio tablesX
ShelvesX
Kitchen backsplashesX
Greenhouse glassX
Exterior doorsXX
Glass floorsXX
Vehicle windshieldsXX
Hurricane resistanceX
UV protectionX
SoundproofingX
Storefront windowsX
Security glassX
Colored art glassX
Table summarizing the uses of tempered and laminated glass

This tempered glass chair mat is scratch-resistant – ensuring long-lasting smoothness and protection.

Durable construction supports up to 1,000 lb.

The importance of tempered glass

The strength and safety of tempered glass has revolutionized the building industry. Now, very large strong, and safe windows can be engineered to bring light into buildings and to moderate temperatures.

Specially engineered tempered glass is used in spectacular structures like the sky deck at the Willis Tower in Chicago:

Willis Tower Skydeck, Chicago

Glass safety – learn from the experts!

Glass tabletops & shelves – info from Artistry in Glass

Artistry in Glass Green Logo

(520) 320-0104

support@tucsoncrystalandchinarepair.com

Opening Hours

Wed - Thu 9.30 - 5.00

Friday ..... 9.30 - 4.00

Sat - Tue .... Closed

Copyright © Artistry in Glass Inc, 1999-2024

All rights reserved

Privacy Policy